Product Details
2021–Present Ford Bronco 2-Door Removable Front Window Vents (6th Gen / Frameless Windows)
Upgrade the airflow and functionality of your Ford Bronco with Visual Autowerks Removable Front Window Vents. Designed for the 2021–Present Ford Bronco 2-Door — 6th Generation, these removable front door window vents are ideal for camping, overlanding, off-roading, road trips, daily driving, pets, and shows.
The vents allow additional airflow through the cabin without having to rely entirely on the A/C. They are useful for camping, traveling with pets, off-road adventures, and everyday driving, while also helping reduce wind turbulence and buffeting during everyday and highway driving with the front windows partially open.
An optional integrated mesh screen is also available to help prevent insects and debris from entering the cabin while still allowing fresh air to flow through.
PLEASE READ BEFORE ORDERING
Window vents are sold in pairs. Choose a quantity of 1 per vehicle.
These vents fit 2021–Present Ford Bronco 2-Door models with frameless front door windows only. They are not designed for the 4-Door Bronco or Bronco Sport.
Frameless Window Design: Unlike our traditional window vents, these are designed to install directly onto the front door window glass and rest against the upper rubber window seal when the door is closed. The window glass does not raise into the vent during installation.
All Visual Autowerks Window Vents are made to order. Please allow approximately 7–10 business days for your order to be manufactured and prepared for shipment.
VEHICLE FITMENT
- 2021–Present Ford Bronco 2-Door — 6th Generation
- Front Door Frameless Windows Only
- Does NOT fit Ford Bronco 4-Door or Bronco Sport models
FEATURES
- Sold as a pair for the front doors
- Designed specifically for 6th Generation Ford Bronco 2-Door models
- Designed for factory frameless front door windows
- Made from high-quality ABS plastic
- Slides directly onto the factory window glass
- Adjustable positioning to sit against the upper rubber window seal
- No drilling, cutting, adhesives, or permanent modification required
- Easily removable when not in use
- Helps increase airflow and cabin ventilation
- Helps reduce wind turbulence and buffeting with the front windows partially open
- Ideal for camping, overlanding, off-roading, road trips, daily driving, pets, and shows
- Optional integrated mesh screen
- Choice of Black, Silver, or Brass colored rivets
- Installation instructions included
Mesh Option: If mesh is selected, the screen is permanently installed within the window vent and is not designed to be removed.
INSTALLATION
Installation is simple and completely reversible. Due to the frameless window design of the Ford Bronco 2-Door, these vents install differently from our traditional window-track-mounted vents.
To install, lower the front door window approximately 3 inches and carefully slide the window vent directly onto the top edge of the glass using the channel along the bottom of the vent.
Once the vent is positioned on the glass, carefully close the door and adjust the window height as necessary until the top of the vent sits snugly against the factory upper rubber window seal, in the same location where the window glass would normally rest when fully closed.
Do not attempt to raise the window glass into the vent. The vent is designed to sit on top of the existing glass, with the window height adjusted to position the vent properly against the upper rubber seal.
Before use, verify that the vent is properly seated on the glass, positioned against the upper rubber seal, and does not interfere with normal door operation.
To remove the vents, carefully lower the window, open the door, and slide the vent upward and off the glass.
No drilling, cutting, adhesives, or permanent modification to the vehicle is required.
IMPORTANT INFORMATION & DISCLAIMER
Visual Autowerks Window Vents are designed to install without damaging the vehicle's windows or factory window trim when properly installed. As with any vehicle accessory, proper installation and use are the responsibility of the customer. Visual Autowerks is not responsible for damage resulting from improper installation or use.
Frameless Window Operation: Due to the unique design of frameless windows, additional care should be taken when installing, adjusting, and removing the vents. Always verify proper positioning and clearance before closing the doors or operating the windows. Do not force the window or door if resistance is encountered.
Window Tint: Our window vents may be compatible with vehicles equipped with aftermarket window tint, and many customers have successfully used them on tinted windows. However, compatibility can vary depending on several factors, including the type, thickness, age, installation quality, and overall condition of the tint film.
Due to the way the vents slide directly onto the window glass, some contact with the glass and/or tint film may occur during installation, adjustment, use, or removal. Because every tint application can vary, Visual Autowerks cannot guarantee that the vents will not scratch, mark, lift, or otherwise damage aftermarket window tint.
Customers with tinted windows should use additional care during installation and use the product at their own discretion. Visual Autowerks is not responsible for damage to aftermarket window tint resulting from installation or use of the window vents.
To help prevent accidental window operation while the vents are installed, we recommend avoiding unnecessary window adjustments once the vents are properly positioned.
INTERNATIONAL ORDERS
International customers may be responsible for import duties, taxes, customs fees, or other charges imposed by the destination country or shipping carrier. These charges are the responsibility of the customer and are not included in the purchase price or shipping cost.
Please include a valid phone number with international orders for shipping and customs purposes.